7
English
CORD CONNECTION
1. Insert DC power cord plug
into port that extends from
the bottom of circulator.
2. Connect the AC power
cord to the power supply.
3. Plug the power cord into
a power outlet.
POWER SUPPLY
(24V DC/1.5 AMP)
VARIABLE SPEED CONTROL
1. Rotate knob to the right to
turn on and increase speed.
2. Rotate knob to left to lower
speed and turn off.
GETTING STARTED
(MODEL 683DC)
Note: The external power supply
may become slightly warm to the
touch during normal operation.
To Next Page
Loading...
