15
English
HOW TO USE
1. Position humidier to not blow directly on objects or plants. Do not allow
Mist Outlet to be obstructed. Plug power cord into the unit’s power jack
in the Base, and then plug the power cord into a standard wall outlet.
Remove label from top of Mist Outlet prior to turning humidier on.
2. To turn humidier on, press POWER . On rst use or when unplugged,
settings will default to LOW humidity level and 100% Illumination.
Humidity level and Illumination settings are saved after power off and will
return when powering back on.
NOTE: Lower humidication settings or turn off humidier if moisture forms on
walls or windows.
Low Water Indicator & Auto Shutoff: When the humidier detects a
low water level, it will automatically power off. If the Power Control is
pressed, then the light will pulsate 3 times to indicate that the water tank
needs relled. Rell the tank and power the humidier back on to resume
operation.
To Next Page
Loading...
Need help?
General
