6 English
information on the rating label, including voltage, is compatible with your
outlet’s power supply.
• Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
• While the product is plugged in, do not insert or allow foreign objects to
enter any input or output opening as this may cause risk of electric shock or
re, or damage the product.
•
A loose t between wall outlet (receptacle) and plug may cause overheating
and distortion of the plug. Discontinue use of the product in this outlet. Contact
a qualied electrician to replace loose or worn outlets.
• The product may be hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Always allow appliance to cool at least 30 minutes before
moving, relling or emptying it. Empty all water and dry unit before storing.
•
Before lling with water, moving, repositioning, servicing, cleaning and when
not in use, use the product controls to turn off the power and then unplug.
To disconnect from outlet, grasp and pull only the plug. Also, power off and
unplug if the product will be left unattended for an extended period of
time or during electrical storms.
• Electric shock can occur when liquid comes in contact with electricity. Be
careful when removing the water tank and relling to avoid electric shock.
Do not pour water through the top Air Outlet on the water tank.
•
Turn the humidier off if the relative humidity exceeds 60%. Humidity levels
above 60% may allow moisture to build up indoors and condense on surfaces,
where microorganisms can settle and grow. For accurate readings, use a
hygrometer which is available at most hardware stores and home centers.
SERVICING WARNING—To reduce risk of re, electrical shock and injury
to persons, observe the following:
• Clean your product regularly, only as is instructed in this manual. Prior to
cleaning, turn off the power on your product and unplug. Do not use gasoline,
thinners, solvents, ammonias or other chemicals for cleaning. Refer to the
CLEANING instructions provided.