12 English
7. Feed the DC power adaptor cord
connector through the hole located at
the back of the wall mount (D).
8. Replace wall mount cover. It will click
into place.
9. Connect DC receiver to DC power
adaptor cord connector
10. Plug the power cord into a power
outlet.
11. Your ATOM 2W AE is now fully
assembled and ready for use.
NOTE: If using wall mount, ensure it
is fully mounted and ATOM 2W AE is fully
secured before use.
Choking hazard. Small parts.
Keep away from children and pets.
To Next Page
Loading...
