Vornado PIVOT3 - User Manual

Need help?

Do you have a question about the Vornado PIVOT3 and is the answer not in the manual?

Summary

Safety and Operation Guidelines

General Safety Instructions

Covers essential safety information for product use, installation, and disposal.

Intended Use and Restrictions

Specifies the product's intended purpose and limitations for use.

Child and Impaired Person Safety

Details supervision requirements for children and individuals with reduced capabilities.

Installation and Safe Use Warnings

Covers warnings for installation, safe operation, and potential hazards.

User Servicing and Fuse Replacement

Provides instructions for user-level servicing, including fuse replacement.

Instruction Retention Guidance

Emphasizes the importance of keeping and saving the product's operating instructions.

Product Features and Controls

Key Product Features

Highlights design, airflow, cleaning, and stability features of the circulator.

Control Dial Operation

Explains how to use the control dial for power and speed selection.

Maintenance and Troubleshooting

Grille Removal and Cleaning

Step-by-step guide for safely removing and cleaning the front grille.

Blade Removal and Cleaning

Instructions for removing and cleaning the fan blade, with safety warnings.

Troubleshooting Common Issues

Addresses common problems like no power, weak airflow, and GFCI trips.

Warranty Information

Product Warranty Details

Outlines the five-year limited warranty, coverage, and service procedures.

Summary

Safety and Operation Guidelines

General Safety Instructions

Covers essential safety information for product use, installation, and disposal.

Intended Use and Restrictions

Specifies the product's intended purpose and limitations for use.

Child and Impaired Person Safety

Details supervision requirements for children and individuals with reduced capabilities.

Installation and Safe Use Warnings

Covers warnings for installation, safe operation, and potential hazards.

User Servicing and Fuse Replacement

Provides instructions for user-level servicing, including fuse replacement.

Instruction Retention Guidance

Emphasizes the importance of keeping and saving the product's operating instructions.

Product Features and Controls

Key Product Features

Highlights design, airflow, cleaning, and stability features of the circulator.

Control Dial Operation

Explains how to use the control dial for power and speed selection.

Maintenance and Troubleshooting

Grille Removal and Cleaning

Step-by-step guide for safely removing and cleaning the front grille.

Blade Removal and Cleaning

Instructions for removing and cleaning the fan blade, with safety warnings.

Troubleshooting Common Issues

Addresses common problems like no power, weak airflow, and GFCI trips.

Warranty Information

Product Warranty Details

Outlines the five-year limited warranty, coverage, and service procedures.

The Vornado PIVOT3 is a whole-room circulator designed to enhance the performance of heating and cooling systems, helping users save energy by optimizing indoor air circulation. This owner's guide provides comprehensive instructions for safe operation, maintenance, and troubleshooting, ensuring the product's longevity and efficient performance.

Function Description:

The Vornado PIVOT3 is engineered to circulate air throughout an entire room, creating a consistent temperature and improving overall comfort. Unlike traditional fans that merely blow air directly, the PIVOT3 utilizes Vornado's signature Vortex Action to move air in a continuous, spiraling path, effectively mixing all the air in the room. This whole-room circulation eliminates hot and cold spots, making the space feel more comfortable without the need to constantly adjust thermostats to extreme settings. By maximizing the efficiency of existing heating and cooling systems, the PIVOT3 helps reduce energy consumption. It is intended for indoor use in residential living spaces within the United States and Canada and is not designed for commercial or industrial applications. The circulator features multiple speed settings, allowing users to select the desired airflow intensity for various comfort levels. Its pivot function enables users to direct the airflow precisely where it is needed, further enhancing its effectiveness.

Usage Features:

The PIVOT3 is designed for user-friendly operation with several convenient features.

Power On/Off and Speed Control: The circulator is equipped with a simple control knob that allows users to turn the unit on or off and select from three fan speeds: Low (I), Medium (II), and High (III). This intuitive control ensures easy adjustment to suit different environmental conditions and personal preferences.
Pivot Function: A key feature of the PIVOT3 is its ability to pivot, allowing users to direct the airflow. This flexibility ensures that air can be circulated effectively in various room layouts and to target specific areas that may require more air movement.
Energy Saving Tip: Vornado highlights that using the PIVOT3 can contribute to energy savings. By maintaining consistent room temperatures through efficient air circulation, users can set their summertime thermostat higher and their wintertime thermostat lower without sacrificing comfort. This reduces the workload on HVAC systems and lowers energy bills.
Safety Features: The PIVOT3 incorporates important safety measures, including a polarized plug and overload protection (fuse). The polarized plug is designed to fit into an outlet only one way, reducing the risk of electric shock. In the event of an overload or short-circuit, the fuse will blow, protecting the unit and preventing potential hazards. Detailed instructions are provided for replacing the fuse, emphasizing the use of a Vornado-approved replacement fuse to ensure continued safe operation. The product also includes a warning against operating with a damaged cord or plug and advises against using solid-state speed devices like dimmer switches, which can increase the risk of circuit overload, fire, and electric shock.
Stability: The circulator is fitted with silicone feet, which are non-marking and provide enhanced stability, preventing the unit from sliding or tipping over during operation.
Finger-Friendly Design: The grille features a design that resists curious fingers, making it safer for households with children.

Maintenance Features:

Regular cleaning is essential to maintain the performance and longevity of the Vornado PIVOT3. The design incorporates features that make cleaning straightforward.

Grille Removal: The front grille is removable for easy cleaning. To access the interior for cleaning, users need a screwdriver to remove four screws located between the ribs of the inlet grille at approximately the 2, 5, 7, and 10 o'clock positions. Once the screws are removed, the grille can be detached.
Grille Cleaning: The front grille can be dusted or washed with a mild dishwashing soap. It is important not to place the grille in a dishwasher, as the excessive heat can distort the plastic. When reattaching the grille, users should ensure the Vornado logo is straight and then replace all the screws.
Air Inlets Cleaning: A helpful tip suggests using a brush attachment on a household vacuum cleaner to remove accumulated dust from the front grille and air inlets, ensuring unobstructed airflow.
Blade Removal and Cleaning: For thorough cleaning, the blade can also be removed. Pliers are recommended for this process. First, the nut from the shaft must be turned clockwise to loosen and remove it. Then, the blade can be pulled straight out from the shaft. The blade can be wiped with a damp cloth. If the circulator is used in a greasy environment, a mild soap or common household cleaner may be used. Solvents should be avoided, and the blade should not be placed in a dishwasher due to potential plastic distortion.
Blade Reattachment: When reattaching the blade, it is crucial to align the flat side of the shaft directly with the corresponding flat side on the blade's socket. The blade should be pushed all the way onto the shaft until it bottoms out. Users are explicitly warned not to use a hammer, as this could result in bearing damage. After the blade is in place, the nut should be reinstalled.
Lubrication: The motor of the Vornado PIVOT3 is permanently lubricated and does not require any oiling, simplifying maintenance and reducing the need for user intervention.
Troubleshooting: The manual includes a troubleshooting section to address common issues such as the unit failing to power on, weak or slow airflow, or a tripped GFCI. This section provides possible causes and solutions, guiding users through basic diagnostic steps before recommending professional service.

By following these instructions, users can ensure their Vornado PIVOT3 operates efficiently and safely for many years, backed by a 5-year satisfaction guarantee.