Need help?Do you have a question about the Vornado PIVOT5 and is the answer not in the manual?
Precautions for placement near heat, water, and cord management during installation.
Advises against water contact, outdoor use, and using with damaged parts or speed control devices.
Covers outlet compatibility, cord handling, polarized plug, and unplugging procedures.
Explains the product's fuse protection and the initial steps for replacement.
Step-by-step guide for replacing the fuse, including troubleshooting.
Precautions for placement near heat, water, and cord management during installation.
Advises against water contact, outdoor use, and using with damaged parts or speed control devices.
Covers outlet compatibility, cord handling, polarized plug, and unplugging procedures.
Explains the product's fuse protection and the initial steps for replacement.
Step-by-step guide for replacing the fuse, including troubleshooting.
The Vornado Pivot5 is a whole room circulator designed to provide efficient air circulation in indoor living spaces. Its primary function is to move air throughout a room, helping to equalize temperatures and improve comfort, whether used in conjunction with heating or cooling systems. This can lead to energy savings by allowing users to set their thermostats at less extreme temperatures.
The Pivot5 features a user-friendly design with several elements aimed at enhancing its functionality and ease of use. It incorporates a Pivoting Head, which allows users to direct the airflow precisely where it is desired. This adjustability ensures that the circulated air reaches specific areas of a room, optimizing its effectiveness.
The device offers Multiple Speeds to cater to various comfort levels and air circulation needs. The power on/off and speed selection are controlled by a single knob. Users can choose between High (III), Medium (II), Low (I) fan speeds, or power off (0). This range of settings provides flexibility, allowing the user to adjust the intensity of the airflow based on the room's conditions or personal preference.
For stability and to prevent damage to surfaces, the Pivot5 is equipped with Silicone Feet. These non-marking feet ensure that the circulator remains securely in place during operation and does not leave scuffs or marks on floors or furniture.
The design also emphasizes safety with its Finger Friendly Design, which resists curious fingers from easily accessing the internal components, particularly important in households with children.
Maintaining the Vornado Pivot5 is straightforward, with features designed for easy cleaning to ensure optimal performance and longevity. The circulator includes a Removable Grille, which is crucial for accessing the internal components for cleaning.
To clean the grille, a screwdriver is required. The process involves removing three screws located between the ribs of the inlet grille at approximately 2, 5, and 9 o'clock positions. These locations are also indicated by arrows on the circulator itself. Once the screws are removed, the front grille can be detached. The grille can then be dusted or washed with a mild dishwashing soap. It is important not to place the grille in a dishwasher, as the excessive heat can distort the plastic. When reattaching the grille, users should position it so that the Vornado logo in the center is straight before replacing all the screws. For routine cleaning, a brush attachment on a household vacuum cleaner can be used to remove accumulated dust from the Front Grille and Air Inlets without needing to remove the grille.
For more thorough cleaning, the blade can also be removed, with pliers recommended for this step. First, the nut from the shaft needs to be removed by turning it clockwise to loosen. Once the nut is off, the blade can be pulled straight out from the shaft. The blade can be wiped with a damp cloth. If the circulator is used in a greasy environment, such as a kitchen, mild soap or a common household cleaner may be necessary. Solvents should not be used, and the blade should not be placed in a dishwasher due to the risk of plastic distortion from excessive heat. To reattach the blade, it is essential to align the flat side of the shaft directly with the corresponding flat side on the blade's socket. The blade should then be pushed all the way onto the shaft until it bottoms out. Users are cautioned not to use a hammer during this process, as it could result in bearing damage. Finally, the nut should be reinstalled.
A key maintenance note is that the motor of the Vornado Pivot5 is permanently lubricated and does not require oiling, simplifying long-term care.
The manual provides important safety instructions, including warnings against operating the fan with a damaged cord or plug, or if the unit has been dropped or damaged. It also details user servicing instructions for replacing a blown fuse, which is a critical safety feature for overload protection. The fuse, a 2.5 Amp, 125 Volt fuse, must be replaced as approved by Vornado Consumer Service. The process involves using a small flat-head screwdriver to open the fuse cover on the plug, gently lifting out the old fuse, installing the new one by pushing its metal ends into the receptacle, and then closing the fuse cover securely. If a replacement fuse blows, it indicates a potential short-circuit, and the product should be discarded or returned to an authorized service facility. The attachment plug contains a safety device (fuse, AFCI, LCDI) that should not be removed, and the product should be discarded if the attachment plug is damaged.
Overall, the Vornado Pivot5 is designed for effective air circulation with an emphasis on user convenience through its adjustable features and straightforward maintenance procedures.
General| Model | PIVOT5 |
|---|---|
| Type | Table Fan |
| Power Source | Electric |
| Fan Speeds | 3 |
| Oscillation | No |
| Blade Size | 5 inches |
| Voltage | 120V |
| Color | Black |
| Warranty | 5 Years |
To Next Page
