20
Cover and Panel Removal
To remove the cover, simply unlock and turn the four
latches. Lift and fold the cover o of the spa.
The equipment bay can be accessed by removing one or
more cabinet panels. The spa controller is located under
the spa below the touchpad.
Caution: The cabinet panels can drop during removal. To
avoid pinching your fingers, the cabinet panels are best
removed by two people.
Each panel is held in place by industrial hook and loop
fastening and two large clips. The panels can be removed
by starting at the bottom corner of a panel and pulling the
panel out toward yourself. The panel can then be lowered
out pf the groove in the bottom of the spa deck.
Reverse this procedure for installing the panels.
To Next Page
Loading...