voss.pet AB 2 - Settings; Adjusting the Spraying Quantity; Adjusting Sensitivity; Fitting the Collar

INSTRUCTION MANUAL VOSS.PET AB 2
8 SETTINGS
You have the possibility to adjust the spray quantity and
the sensitivity of the sensor.
8.1 ADJUSTING THE SPRAYING QUANTITY
You can choose between a small and a large spray quantity.
To change the spraying quantity, briey press the setting
button (6) once.
Small spraying quantity: LED 2 (5) ashes yellow.
Large spraying quantity: LED 2 (5) ashes blue.
8.2 ADJUSTING SENSITIVITY
You can choose between low and high sensitivity. To
change the sensitivity, press and hold the setting button
(6) for 3 seconds.
Low sensitivity: LEDs 1 and 2 (4 and 5) light up once
simultaneously.
High sensitivity: LEDs 1 and 2 (4 and 5) light up twice
simultaneously.
9 FITTING THE COLLAR
The correct t and position of the collar is important for
eective operation.
1. Turn the power o and connect the device to the collar.
2. Place the collar around your standing
dog so that the spray opening is
perpendicular to the nose (Fig. 3) and
adjust to the correct size.
Fig. 3
24
24548 | 10 | 2020 | V 1