VOX electronics EM-2100

Questions and Answers

C
Christopher JohnsonAug 5, 2025
What to do if the “ICE FULL” indicator lights up on my VOX electronics EM-2100 Ice Maker?
- C
  Carla BirdAug 5, 2025
  If the “ICE FULL” indicator is on, it could be that the ice basket is full, blocking the infrared light. Remove the ice from the basket. Alternatively, the infrared light-emitting diode and light-receiving diode may be obstructed. In this case, wipe any unknown objects from these components and restart the VOX electronics Ice Maker. If the issue persists after cleaning and restarting, further assistance might be needed.
C
Courtney SpencerAug 11, 2025
Why does the “ADD WATER” indicator turn on in my VOX electronics EM-2100 Ice Maker?
- J
  Jasmine BrewerAug 11, 2025
  If the “ADD WATER” indicator illuminates on your VOX electronics Ice Maker, it means that the water level is low or there is a lack of water. Stop the ice-making process, refill the water reservoir, and then press the “ON/OFF” button to restart the cycle. It could also indicate that the water screen at the bottom of the reservoir is blocked, requiring cleaning. If the problem persists, it might indicate a pump malfunction, requiring authorized service repair.
F
fernandezsuzanneAug 17, 2025
What to do if VOX electronics EM-2100 cycle is normal but no ice is produced?
- D
  David SanchezAug 17, 2025
  If your VOX electronics Ice Maker seems to be running normally but isn't producing ice, the ambient or water temperature might be too high. Try operating the ice maker in an environment where the ambient temperature is less than 32°C and use cold water to fill the reservoir. If this doesn't resolve the issue, there may be a refrigerating system leak or blockage, in which case you should contact customer service.
R
Ronald NelsonAug 22, 2025
How to improve poor ice-making results with my VOX electronics EM-2100 Ice Maker?
- C
  Christine WestAug 22, 2025
  If you're experiencing poor ice-making results with your VOX electronics Ice Maker, it could be due to poor heat dissipation. Ensure there is a 6-inch clearance on all sides of the ice maker for proper ventilation. Also, check the water temperature; it should be between 8°C and 28°C. Lastly, the ambient temperature should be between 10°C and 32°C for optimal performance.
E
ebyrdAug 28, 2025
Why does ice collect together in my VOX electronics Ice Maker?
- T
  Taylor ReedAug 28, 2025
  If the ice is collecting together in your VOX electronics Ice Maker, it could be due to the ice-making cycle taking too long. Stop the ice-making process and restart it after the ice melts. Another reason might be that the water in the reservoir is too cold. Ensure the water temperature is between 8°C and 25°C.