“ICE FULL”
indicator lights up
1. Ice basket is full and the
infrared light is blocked by
the ice.
2. Infrared light-emitting
diode & light-receiving diode
do not work.
1. Remove the ice from ice basket.
2a. Wipe unknown objects on the
infrared light-emitting diode &
light-receiving diode and restart the
ice maker.
2b. Call Customer Service if the
infrared light-emitting diode &
light-receiving diode still cannot
work after wiping unknown objects
on and restarting the ice maker.
Making ice takes too much
time.
Stop making ice and restart the
ice-making cycle after the ice
melts.
The water in the water
reservoir is at too low
temperature.
Fill the water reservoir with water
ranges between 8℃ and 25℃.
The ice-making cycle
seems normal but no
ice is produced
The ambient temperature or
water temperature is too
high.
Start the ice-making cycle at
environment with an ambient
temperature less than 32°C and
fill the water reservoir with some
cold water.
Refrigerating system leaks.
Refrigerating system blocks.
1.Poor heat dissipation.
2.The water temperature is
too high.
3.The ambient temperature is
too high.
1. Leave a 6-inch clearance on all
sides of the ice maker for proper
ventilation.
2. Fill the water reservoir with
water ranges between 8℃ and
28℃.
3. Operate the ice maker at a
environment with an ambient
temperature between 10℃ and
32℃.
To Next Page
Loading...
Need help?
General