EN
29
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
• The original packages and foamed polystyrene (PS) can
be retained if required.
• During transportation, the appliance should be secured
with a wide string or a strong rope. The instructions
written on the corrugated box must be followed while
transporting.
• Before transporting or changing the installation position,
all the moving objects (ie,shelves,crisper…) should be
taken out or xed with bands in order to prevent them
from getting damaged.
Repositioning the door
• It is not possible to change the opening direction of your
refrigerator door, if the door handle on your refrigerator is
installed from the front surface of the door.
• It is possible to change the opening direction of the door
on models without any handles.
• If the door opening direction of your refrigerator may
be changed, you should contact the nearest Authorised
Service Agent to have the opening direction changed.
To Next Page
Loading...
