44
8. Use value knob 3 (2.5) or the ▲, ▼ buttons (3.2) to specify how the expression
pedal control value will be initialized.
“EXP INIT” specifies whether the control data (pedal position) of the expres-
sion pedal will be maintained when you switch programs.
If this is “OFF,” the parameter selected as the expression target will immedi-
ately change to the current position of the pedal at the moment you switch pro-
grams.
If this is “On,” and you switch programs, the newly-selected program will sound
just as it did when it was saved (i.e., the control data will be initialized).
NOTE: The “EXP INIT” setting is not saved for individual programs; it applies to all
of the programs.
NOTE: Even if this is “OFF,” the target parameter will not change if the expression
pedal has not been operated even once since the power was turned on.
9. Press the TUNER/CANCEL button (3.7) to return to the mode you were in.
To Next Page
Loading...
Need help?
General
