7
Checking out the preset programs
1. Press the top panel [PRESET] switch.
The PRESET LED will light up(Preset mode).
2. Turn the [AMP] selector to select an amp model.
A preset program for a sound that is typical of each amp model will be recalled, and
the GAIN, VOLUME, TREBLE, MIDDLE, BASS, and effect settings will switch auto-
matically.
HINT: The amp models are organized into two banks, each bank contain-
ing eleven models (a total of twenty-two). Press the AMP switch to change
banks. Each time you press this, the AMP LED will change to green or red,
and you’ll alternate between amp banks A and B. Each of the twenty-two
amp models has three preset programs (a total of sixty-six programs). In
Preset mode, pressing the [PRESET] switch will cycle the PRESET LED be-
tween green, orange, and red, switching between preset programs 1 (basic),
2 (effected), and 3 (song).
Each song program reproduces the tone of a hit played by a famous guitar-
ist.
Switching between the user programs
1. Press one of the top panel [CHANNEL] switches ([CH1], [CH2], [CH3], or [CH4]).
The LED of the [CHANNEL] switch you pressed will light, and the user program
specified for that channel will be recalled (Channel Select mode).
HINT: The user programs are organized into two banks, each bank contain-
ing four channels (a total of eight programs). Press the [CHANNEL BANK]
switch to switch banks. Each time you press it, the BANK LED will change
between green and red, switching between channel banks 1 and 2.
HINT: You can store your own favorite sounds in a program. For details,
refer to “Saving a program” (p.15).
To Next Page
Loading...
Need help?
General
