S70
57
ENGLISH
PART NAMES AND FUNCTIONS
1. Auto Beat Loop control knob
Loops can be set automatically without breaking the beat by pressing the AUTO BEAT LOOP control knob. The
loop’s number of beats can be changed by turning the AUTO BEAT LOOP control clockwise or counterclockwise.
AUTO BEAT LOOP control
Turn: set the length of the auto beat loop’s length in units of beats. The loop length can be changed by 1/32,
1/16, 1/8, 1/4,1/2,1,2,4,8,16,32 beats.
Press: Turns loop playback on and off.
CAUTION
: You can’t active the Auto Beat Loop function till the BPM is displayed.
2. Loop In / Real-time Cue / Hot loop button
This function allows you to set a cue point without music interruption. This button also sets the starting point of
a seamless loop. During loop playback, press this button to start over the loop playback. What we called HOT
LOOP function. Repeatedly press the IN button to create a stuttering effect.
3. Loop Out button
This button is used to set the ending point of a loop. A loop is started by pressing the IN button, pressing the
OUT button set the loop ending point. The loop will continue to play until the RELOOP/EXIT button
4
is pressed.
During loop playback, press the LOOP OUT button. The display will show the loop-out point time, and the LOOP
OUT button will fl ash, while the LOOP IN button indicator turns off. Rotate the JOG WHEEL to adjust the loop out
point. Press LOOP OUT button again to save the new out point and exit the adjust mode.
4. Reloop/Exit button
If a Seamless Loop has been made, but the player is not actively in seamless loop mode, pressing the RELOOP/
EXIT button will instantly reactivate the seamless loop mode. To exit loop, press the button again. RELOOP will
appear in the VFD display when the RELOOP function is available.
During play mode, pressing the RELOOP button will instantly return play to the last set loop without interrupting
playback.
5. Track/Folder Search knob
• Under TRACK SEARCH mode this knob is used to select a track. Turning the knob will forward/backward skip
to next track.
• Press the TRACK/FOLDER SEARCH switch button
20
the LED lit to switch the knob as TRACK/FOLDER
Search knob. If a CD/MP3 or USB device is divide into folders, change directly into these folders use the knob.
Turn the knob to search the desired folder.
6. Source Select button
Use this button to switch between the two media modes - USB1/USB2.
To Next Page
Loading...