EasyManua.ls Logo

Voxoa S70 - Page 29

Default Icon
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
ENGLISH
OPERATIONS
To Exit the Loop
During loop playback, press the RELOOP/EXIT button
4
to exit the loop. When the music reaches the out point,
it will play through it instead of looping back to the in point.
To replay a seamless loop (Reloop)
To replay the loop, press the RELOOP/EXIT button
4
. The loop can be re-triggered by pressing the button (until
a new loop is created). Press the RELOOP/EXIT button
4
to exit the loop again.
To Adjust LOOP Out point
Once a seamless loop is created, the out point can be changed without stopping the loop play.
Step 1 : During loop play, press the LOOP OUT button
3
. The time display will show the out-point time; the LOOP
OUT button will change to quick fl ashing, while the LOOP IN button
2
light will off.
Step 2 : Rotate the JOG WHEEL to the desired out point. The loop out point will change in one-frame increments.
Step 3 : Press LOOP OUT button
3
again to save the new out point and exit the modifying loops mode to loop
play mode.
Hot Loop
Press IN button during loop playback, to return to the loop in point and to start over the loop playback. You can
repeatedly press the IN button to create a stuttering effect.
Auto Beat Loop control
Loops can be set automatically without breaking the beat by pressing the AUTO BEAT LOOP control knob. The
loop’s number of beats can be changed by turning the AUTO BEAT LOOP control clockwise or counterclockwise.
Turn: set the length of the auto beat loop’s length in units of beats. The loop length can be changed by
1/32,1/16, 1/8, 1/4,1/2,1,2,4,8,16,32 beats.
Press: Turns loop playback on and off.
NOTE
: You can’t active the Auto Beat Loop function till the BPM is displayed.
Setting Hot Cues/Loops
To save a Hot-cue point/Loop points to an empty bank pad, simply press one of the empty BANK pad. It will fl ash
orange/blue, and then turn solid orange/blue, letting you know that a Hot-cue point/Loop has been stored.
Buttons containing hot cue points will light orange.
Buttons containing loop data will light Blue.

Related product manuals