VPro MAX Series - ST and SL Valve Specifications; ST;SL Valve Design and Connection; ST;SL Suitable Fluids; ST;SL Maximum Pressure Ratings

OSYSR225-EN
5/7
VALVES SPECIFICATIONS
Water Oil Air, Gas Steam Chemicals Sea water Slurry Negative pressure
ST SL type
Valve type ST / SL
Design 3 way, Standard port
Connection Threaded End Rc
Fluid
Max pressure 1 MPa
Size [mm] 015 to 032
Material Body SCS14A
Ball SCS14A
Seat F-PTFE
Stem seal Packing F-PTFE
O-ring -
PRESSURE & TEMPERATURE RATING
FLOW PATHS (Position / P1) (Position / P2)
SL
ST
Form: a Form: b Form: c Form: d
P1 P2 P1 P2 P1 P2 P1 P2 P1 P2
Note) When a closed path is exposed to high pressure, it may leak slightly to an open path.