Vremi VRM012001N - Key Button Functions

16 · Operation · Dehumidifier 50, 35, 22 Pint
"Power" button Press to turn the Dehumidier on and off.
"Left" / "Right"
buttons
NOTE: When the Dehumidier is rst turned on, it will
go on "Continuous" mode by default. This will disable
use of the "Left" / "Right" buttons. Make sure to turn off
"Continuous" mode to regain function in these buttons.
"Humidity
Set Control"
buttons
∙ The humidity level can be set within a range of 35% RH
(Relative Humidity) to 85% RH (Relative Humidity) in
5%increments.
∙ For drier air: Press the button to set a lower
percentage value (%).
For damper air: Press the button to set a higher
percentage value (%).
"Timer Set
Control"
buttons
Press to initiate the "Auto Start" and "Auto Stop" feature,
inconjunction with the and buttons.
NOTE:
If any of the above malfunction codes occur:
1. Turn off the Dehumidier.
2. Check for any obstructions.
3. Restart the Dehumidier.
If the malfunction is still present:
1. Turn off the Dehumidier.
2. Unplug the Power Cord.
3. Contact Customer Service for repair and/or replacement.