500 Series
Check to make sure attachment is completely lubricated.
Buyer is shown all grease fittings and proper gear oil height.
Oil in Gearbox checked for proper level and weight.
All bolts checked for tightness.
All hitch pins and retainer bolts in place.
All knives and linkages in place.
All shields in place.
Belts checked for proper adjustment.
PTO shaft checked for proper length.
Procedures for attaching mower/shredder to tractor demonstrated to end user.
Starting procedures explained to end user.
Operation guidelines as outlined in owner’s manual explained to end user.
Adjustment of cutting height, belts and mower height explained to end user.
Replacement of mower/shredder knives explained to owner.
Lubrication points shown to end user.
ALL safety precautions thoroughly read and understood.
Delivery Report Form
Prior to acceptance of the equipment, thoroughly check and mark off the items outlined in
the delivery checklist below with your sales representative. Make sure you fully understand
the operation, adjustment and safety rules as outlined in the operator’s manual. The sales
representative is responsible for going over this form with the owner and operator of this
attachment. This form also serves as your warranty registration. Fax to 209-882-9001.
Customer Information
Last Name Street Address
City
Attachment Information
Dealer Information
State Zip
Model Serial Number
Company Name Sales Rep. Name
Company Street Address City State Zip
The signatures below indicate that both the sales representative and the end user
have gone over the above checklist and all topics have been covered thoroughly.
Buyer Signature
Sales Rep. Signature
Date
Date
Fax this completed form to 209-882-9001
To Next Page
Loading...