3333
(2)
(3)
(1)
9. Installing the door stop and grip
Door stop.
The door stop (1) is fastened in the holes on the back of the
outer outer sliding doors using 6.3 x 15 mm euro screws.
Mounting the strip handles
On wooden doors.
Fix the strip handles using the holes provided (2) in the
front of the inner sliding door using 4.0 x 50 mm counter-
sunk screws.
On glass doors.
Fix the strip handles in the front of the inner sliding door (3)
using M4 x 8 mm countersunk screws.
To Next Page
