VS Pareto - User Manual

Questions and Answers

E
elizabethlunaAug 13, 2025
What to do if my VS Indoor Furnishing desk does not move?
- M
  Matthew LeeAug 14, 2025
  If your VS Indoor Furnishing desk does not move, several factors could be the cause. First, ensure that the maximum operating time has not been exceeded and the operating time restriction is not active. Next, verify that all cables are correctly inserted and that there is a functioning electricity supply. Also, check that the load on the desk is not too high and that no obstacles are blocking its path.
J
Jennifer AdamsAug 17, 2025
Why the drives do not function in my VS Indoor Furnishing?
- L
  lisa99Aug 17, 2025
  If the drives of your VS Indoor Furnishing do not function, it could be due to several reasons. Ensure the power cord is properly plugged in, as well as the motor cable. Check all plug-in contacts to ensure they are correctly connected. If the problem persists, it may be due to a faulty drive, controller, or desk handswitch.
F
fmartinAug 21, 2025
What to do if I see E-59 on my VS Indoor Furnishing?
- J
  Jeff RodriguezAug 21, 2025
  If you encounter the error code E-59 on your VS Indoor Furnishing, it indicates that the collision protection has been triggered. To resolve this, check the travel path of the desk and remove any obstacles that may be obstructing its movement.
C
Cynthia DavisAug 25, 2025
What to do if I see E-60 on my VS Indoor Furnishing?
- W
  woodcarmenAug 25, 2025
  If you encounter the error code E-60 on your VS Indoor Furnishing, it means the collision protection has been activated. Inspect the travel path and clear away any obstructions.
N
Noah GarciaAug 28, 2025
Why does my VS Indoor Furnishing drive run in only one direction?
- Z
  Zachary Henderson MDAug 28, 2025
  If your VS Indoor Furnishing drive only runs in one direction, this may be due to a faulty controller or desk handswitch.
S
Sharon VelezSep 1, 2025
What to do if my VS Indoor Furnishing desk handswitch does not work?
- C
  Charles WrightSep 1, 2025
  If the desk handswitch of your VS Indoor Furnishing is not working, it could be due to a faulty controller, power cord, or the handswitch itself. Also, check the connector to ensure it is properly plugged in.
B
Briana SmithSep 5, 2025
How to fix error E-01 on VS Indoor Furnishing?
- S
  Sierra SmithSep 5, 2025
  If you see error code E-01 on your VS Indoor Furnishing, it indicates a loss of position. To fix this, perform a reset.
J
jwoodSep 8, 2025
What does error E-16 mean on VS Indoor Furnishing?
- P
  perezcassandraSep 8, 2025
  Error code E-16 on your VS Indoor Furnishing indicates a button error. This is due to an incorrect combination of buttons being pressed on the handswitch, meaning the button combination is not supported.