EasyManua.ls Logo

VS Pareto - Incorrect Use; Scope of Delivery, Assembly, Transport, Storage

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
1.3 Incorrect use
- This equipment can be used by children as of 8 years of age as well
as by persons with reduced physical, sensory or mental capabilities
or who lack the relevant experience and knowledge provided that
they are supervised or have been instructed in the safe use of the
equipment and understand the risks involved. Cleaning operations
must not be performed by children unless they are supervised.
- Never use the seated/standing workplace to lift persons or loads.
- Only load the seated/standing workplace up to the maximum load
permitted across the full surface of the desk (see section 7 Technical
Data).
Caution!
Children must not play with the equipment.
Caution! Rodents should be kept away from electrical operating
equipment and their power supply lines. Damaged lines may pose a
risk to humans and animals.
1.4 Scope of delivery, assembly, transport, storage
- VS Vereinigte Spezialmöbelfabriken GmbH & Co KG delivers the
seated/standing workplace fully assembled.
- During the warranty period, repairs may only be performed by
employees of VS Vereinigte Spezialmöbelfabriken GmbH & Co. KG.
- The assembly of subsequently supplied accessories and/or conversion
operations made necessary by them may only be performed by
persons who are perfectly familiar with the assembly instructions.
Only original VS accessories may be used.
- If you have to move the seated/standing workplace, make sure that
the plug has been disconnected from the mains and that there are
no objects on the desk.
- Only carry the seated/standing workplace by its frame or use a
trolley (furniture trolley).
- The seated/standing workplace may only be moved by two persons
working together and it must be in its retracted state. Under no
circumstances should you pull or tilt the seated/standing workplace.
After moving the desk, you must always perform a manual reset
(initialization) (see section 4.0).

Table of Contents

Related product manuals