EasyManua.ls Logo

VS Pareto - Operational and Hazard Prevention; Operational Safety and Maintenance; Hazard Prevention During Operation

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Caution! Before taking the system into operation, make sure that
the operating voltage of the system corresponds to the local power
supply. The system is in operation as soon as it is connected to the
power supply.
Caution! The collision protection is not an entrapment or personal
protection mechanism! For physical reasons, “soft” obstacles may
only be poorly detected and evaluated or may not be detected at all!
If the desk travels against an obstacle then it is possible that the
obstacle may suer damage because the desk travels against it at its
nominal speed!
Caution! Before using the desk for the first time or in the event of a
malfunction, a manual reset (initialization) must be performed.
Caution! If the button is released before the operation has been com-
pleted then initialization will be interrupted and has to be repeated.
If initialization is interrupted then the system cannot travel upwards.
Caution! If the desk travels against an obstacle then it is possible
that the obstacle may be damaged because the desk travels against
it at its nominal speed!
Caution! During the warranty period, the drive elements may only
be replaced by the VS Customer Service (VS-KD).
Wichtig! If you have any further questions, please consult your
responsible expert VS consultant or the appropriate VS branch.
Caution! When using the drive, make sure that no objects or body
parts are trapped!

Table of Contents

Related product manuals