3. Add cameras to the network
Note: If it failed to add the camera by the
'
Scan QR code' , please choose the Method Two
in the 'Others' to add the camera.
3.1 Scan QR Code
Please power on the camera, wait until the reboot
of the camera finished(it takes about 30 seconds),
then the camera will say " Please use APP for wifi
conguration"or "WiFi conguration is waiting" ( If the
camera doesn't say anything, please reset the camera
to factory default settings by holding the reset button
for 10 seconds, then it will say "reset completed,
device will reboot soon" ).
To Next Page
Loading...
