Positioning and operating range
Position the audio monitor
Place the parent unit within the operating range of the baby unit.
We recommend the parent unit is at least 1.5 metres away from the
baby unit to avoid audio feedback. If you still experience audio
feedback, move the parent unit and the baby unit farther apart.
Notes
• If the signal is poor, try moving the parent and/or the baby unit to
different positions in the rooms.
• It is the caregiver’s responsibility to stay close enough to take care of any
eventuality.
Test your audio monitor before use
It is important to test the audio monitor when it is installed initially,
and at regular times thereafter. Test your parent unit and baby units
if they have not been used for a long time or you suspect they are
defective.
To test your audio monitor:
1. Place the parent unit and the baby unit in the same room to test
the product. Make sure the baby unit is at least 1.5 metres away
from the parent unit.
2. Press and hold on the baby unit until the Power indicator light
turns on.
3. Press and hold on the parent unit until the Power indicator
turns on steadily. The parent unit plays sound detected from the
baby unit. Your audio monitor is now ready for use.
Note
• If no connection can be established, the Power indicator light on the
parent unit flashes in green.
To Next Page
Loading...
Need help?
General
