VTech BM3450N - Room Temperature Monitoring; Setting Temperature Alert Range; Configuring Temperature Alerts; Temperature Unit Selection

2. Press or to choose .
3. Press or to choose , then pressSELECT.
4. Press or to choose or , then pressSELECT.
5. Press or to choose the desired minimum or maximum temperature, then pressSELECTto confirm
your selection.
Temperature alert tone
You can turn on the temperature alert tone so that the parent unit will activate an alert tone if the detected
temperature is out of range.
1. PressMENUwhen the parent unit is idle.
2. Press or to choose .
3. Press or to choose , then pressSELECT.
4. Press or to choose or , then pressSELECTto confirm your selection.
Temperature format
You can choose to display the temperature inFahrenheit ( F)orCelsius ( C).
1. PressMENUwhen the parent unit is idle.
2. Press or to choose .
3. Press or to choose , then pressSELECT.
4. Press or to choose or , then pressSELECTto confirm your selection.
Monitor the temperature - BM3450N | BM3450N-2
Your baby unit monitors the temperature of your baby’s room with its built-in temperature sensor. If the detected
temperature is out of the preset temperature range, the parent unit will display an alert message.
Set temperature range
You can set the desired room temperature alert range. The minimum temperature can be set between50
o
F
(10
o
Cand68
o
F (20
o
C. The maximum temperature can be set between72
o
F (22
o
Cand99
o
F (37
o
C.
1. PressMENUwhen the parent unit is idle.
o o
22