VTech BM4700N - Projection Light

The baby monitor has the projection light for you to soothe and comfort your baby at night.You can turn on or off the projection
light on the baby unit using the parent unit. You can also turn on or off the projection light with the baby unit manually.
To turn on or off the projection light:
1. Press on the parent unit.
2. Press or to go to (Projection light).
3. Press to toggle between and .
Set timer to turn off projection light:
1. Press on the parent unit.
2. Press or to go to (Projection light), then press .
3. Press or to go to ,then press .
4. Press or tohighlight , , , , or . If you selectAUTO, the projection light automatically
turns on when the baby unit detects sound. It will turn off after 15 minutes of no sound detection. You can setVOX sensitivity
levelto detect sounds that exceed certain levels.
To turn on or off projection light using the baby unit:
Press on the baby unit.
The projection light located on the top of the baby unit projects a starry soft night light scene ontothe ceiling with a tilting angle.
Adjust your baby unit’s position with the projection light to helpsooth your baby to sleep. For optimal performance, place the
baby unit in upright position.
Projection light
23