VTech BM5750HD - Basic Operation; Powering Units On and Off

17
Basic Operation
Power on/o󰀨
1� Slide the power switch to ON to turn on your baby unit. Slide to the opposite
direction to turn o󰀨.
Notes:
• When powering up, the baby unit’s status LED turns on. It will turn o󰀨 after a while and keeps
o󰀨.
• The status LED is set to o󰀨 by default. If you want to keep the LED on, press MENU/
SELECT, then go to > Status LED and turn it on.
• Camera lens and surface may get warm during normal operation.