15
Charge the parent unit battery before use
When you have connected and turned on the parent unit, the battery will be
charged automatically.
Notes
• Before using the baby monitor for the rst time, charge the parent unit battery for 12 hours.
When the parent unit battery is fully charged, the battery icon becomes solid .
• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging
time, turn the parent unit o while charging.
• The standby time varies depending on the sensitivity level you set, your actual use and the age
of the battery.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays
. The light ashes.
The battery has very
little charge and may
be used for only a short
time.
Charge
without interruption
(about 30 minutes).
The battery icon
becomes solid .
The battery is fully
charged.
To keep the battery charged,
connect it to AC power when
not in use.
To Next Page
Loading...
