VTech CD1261 User Manual

Getting started
8
Rotate the bracket 180 degrees to the
wall installation position. Insert the
tabs on the bracket into slots
a
and
b
on the base, then push the bracket
upwards until it clicks into place.
3. Route the telephone line cord
through the channel as shown
below. Then plug the other end
of the telephone line cord into a
telephone wall jack. Mount the
telephone base on the mounting
plate. Make sure the mounting
holes in the telephone aligns
with the mounting studs on the
mounting plate.
4.
Plug one end of the coiled handset cord
into the handset jack on the left side of
the telephone base. Plug the other end
into the handset and then hang up.
5.
PUSH
TO RELEASE
PUSH
TO RELEASE
PUSH
TO RELEASE
a
b

VTech CD1261 Specifications

General

Brand	VTech
Model	CD1261
Category	Telephone
Language	English