VTech Chat & Learn Reading Monkey

4
BATTERY INSTALLATION
1. Open fabric on the back of the monkey.
2. Make sure the unit is turned OFF.
3. Locate the battery cover and open it
with a screwdriver.
4. Install 2 new “AA” size (LR6/AM-3)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeas
recommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard
(carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used
batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.
BATTERY INSTALLATION & BATTERY NOTICE