VTech CS5319-2 User Manual

5
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
• Use only the adapters provided.
• Make sure the electrical outlets are not
controlled by wall switches.
• The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
• If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
Connect the charger
Mount the telephone base
1. Connect the telephone line cord to
the telephone base. Route it through
the wall mount bracket, and then
connect it to the wall jack.
2. Align and place the wall mount
bracket on the standard wall plate.
B
A
B
B
A
A
B
B
A
A

VTech CS5319-2 Specifications

General

Brand	VTech
Model	CS5319-2
Category	Cordless Telephone
Language	English