This document describes the VTech CS1300-B cordless telephone, a DECT-compliant device designed for home or office use. It provides detailed instructions for setup, operation, and maintenance, along with important safety information and warranty details.
Function Description
The VTech CS1300-B is a cordless telephone system consisting of a handset and a base station. It allows users to make and receive calls, store contacts in a phonebook, manage call lists, and block unwanted calls. The phone features an LCD display on the handset to show call information, menu options, and status icons. It supports various customizable settings for personalizing the user experience, including date and time, ringer melodies and volume, alert tones, and handset display information. The system also includes a paging function to locate misplaced handsets.
Important Technical Specifications
- Power Adaptor (Base Station):
- VTech (Qingyuan) Plastic & Electronics Co. Ltd. - Model: VT04EEU06045
- Input: 100-240V AC 50/60Hz 150mA
- Output: 6VDC 450mA (EU plug)
- Shenzhen Ruijing Industrial Co. Ltd. - Model: RJ-S060450E002
- Input: 100-240V AC 50/60Hz 150mA
- Output: 6VDC 450mA (EU plug)
- Battery (Handset): AAAx2, Ni-MH, 300mAh
- Compliance: European Directive 2002/96/EC (WEEE), R&TTE Directive 1999/5/EC (DECT)
- Call Block Feature: Automatically rejects incoming calls without caller number display (withheld or unavailable numbers).
- Phonebook Capacity: Allows storage of multiple entries.
- Redial List: Stores previously dialed numbers.
- Call List: Displays incoming call information (requires Caller ID service).
- System PIN Code: Default is 0000.
Usage Features
Setup and Installation:
- Base Connection: Connect the power adaptor to the base station and a wall power outlet. Connect the telephone line cord to the base station and a telephone wall jack.
- Handset Battery Installation: Insert 2 AAA Ni-MH 300mAh rechargeable batteries into the handset, observing correct polarity.
- Charging: Place the handset on the base station's charging cradle to charge the battery. Use only the supplied batteries and power adapter.
- Battery Care: Disconnect and remove batteries if the handset is not used for a long time to prevent leakage.
Basic Call Functions:
- Switch On/Off Handset: Press and hold the "TALK OFF / CANCEL / BACK" button.
- Make a Call: Enter the phone number using the alphanumeric keypad, then press the "TALK ON / RECALL(FLASH)" or "SPEAKERPHONE" button.
- Answer an Incoming Call: Press the "TALK ON / RECALL(FLASH)" or "SPEAKERPHONE" button. If "AUTO ANSWER" is ON, simply lift the handset from the base.
- End a Call: Press the "TALK OFF / CANCEL / BACK" button or place the handset on the base.
- Adjust Listening Volume: During a call, press the "UP / REDIAL LIST / VOLUME UP" or "DOWN / CALL LIST / VOLUME DOWN" buttons.
- Mute/Unmute Call: During a call, press the "MUTE / DELETE / INTERCOM" button.
- Turn Handset Ringer On/Off: Press and hold the "#" (HASH) key.
- Turn Keypad Lock On/Off: Press and hold the "*" (STAR) key.
- Access Menu: In idle mode, press the "MENU / OK" button.
- Scroll Options: Use the "UP / REDIAL LIST / VOLUME UP" and "DOWN / CALL LIST / VOLUME DOWN" buttons to scroll.
- Select Option: Press the "MENU / OK" button.
- Return to Previous Screen: Press the "MUTE / DELETE / INTERCOM" button.
- Return to Idle Mode: Press and hold the "MUTE / DELETE / INTERCOM" button.
Redial Functions:
- Redial a Number: Press the "REDIAL LIST" button, scroll to the desired entry, then press the "TALK ON / RECALL(FLASH)" or "SPEAKERPHONE" button.
- Store Redial Number to Phonebook: From the redial list, select an entry, then navigate to "ADD TO PB" and enter name, number, and melody.
- Delete Redial Number: From the redial list, select an entry, then navigate to "DELETE".
- Delete All Redial Numbers: From the redial list, navigate to "DELETE ALL".
Phonebook Functions:
- Store Entry: Press the "PHONEBOOK" button, navigate to "ADD", and enter name, number, and melody.
- Dial an Entry: Press the "PHONEBOOK" button, scroll to the desired entry, then press the "TALK ON / RECALL(FLASH)" or "SPEAKERPHONE" button.
- Edit Entry: Press the "PHONEBOOK" button, scroll to the desired entry, navigate to "EDIT", and modify name, number, and melody.
- Delete Entry: Press the "PHONEBOOK" button, scroll to the desired entry, navigate to "DELETE".
- Delete All Entries: Press the "PHONEBOOK" button, navigate to "DELETE ALL".
- Check Phonebook Status: Press the "PHONEBOOK" button, navigate to "PB STATUS" to see occupied and available entries.
Phone Settings:
- Date and Time: Set date format (DD-MM-YY / MM-DD-YY), time format (12 HR / 24 HR), current time (AM or PM), and current date.
- Alarm: Set alarm time, AM/PM, and snooze function.
- Ringer Melody: Set melodies for external and internal calls (MELODY 1 - MELODY 10).
- Ringer Volume: Adjust volume (VOLUME 1 - VOLUME 5) or turn off (VOLUME OFF).
- Alert Tones: Turn on/off key tone, low battery tone, and out of range tone.
- Rename Handset: Change the name displayed for the handset.
- Language: Select the desired language for the handset display.
- Handset Display Information: Choose between HANDSET NAME or TIME display.
- Auto Answer: Turn on/off the auto answer feature.
Base Settings:
- Dial Mode: Set to TONE or PULSE (country dependent).
- Flash Time: Set to SHORT, MEDIUM, or LONG (country dependent).
- Change System PIN Code: Change the default PIN (0000).
Caller Display (Requires Caller ID Service):
- Store Call List Number to Phonebook: From the call list, select an entry, navigate to "ADD TO PB", and enter name, number, and melody.
- Delete Call List Entry: From the call list, select an entry, navigate to "DELETE".
- Delete All Call List Entries: From the call list, navigate to "DELETE ALL".
- View Call List Entry Details: From the call list, select an entry, navigate to "DETAILS".
Call Blocker (Requires Caller ID Service):
- Block Calls Without Number Display: Turn on/off the call block feature. Choose to block Private (withheld) numbers, Unavailable numbers, or Both. Blocked calls will not ring but will be logged as "Blocked call".
Troubleshooting:
- No Power/Functionality: Check battery installation and charge, power adapter connection, and telephone line cord. Reinstall batteries and power cycle the base.
- Interference: Move handset closer to base, install DSL filter if applicable, move base away from other electronic appliances (wireless routers, radios, TVs, computers, etc.), check telephone line wiring.
Maintenance Features
General Care:
- Handling: Treat the cordless telephone with care, avoid rough treatment, and place the handset gently.
- Packaging: Save original packing materials for potential shipping.
Environmental Precautions:
- Water Exposure: Avoid using the handset in rain or with wet hands. Do not install the base near water sources (bathtub, sink, pool). If the base falls into water, unplug power and telephone cords before retrieving.
- Direct Sunlight/Extreme Cold: Do not expose the telephone to direct sunlight or extreme cold.
- Heat Sources: Do not place the telephone near radiators, cookers, or other heating sources.
- Electrical Storms: Avoid using the telephone (except cordless type) during electrical storms due to lightning risk. Take caution with other electric appliances.
- Gas Leaks: Do not use the telephone to report a gas leak in the vicinity of the leak.
Cleaning:
- Handset Casing: Clean with a soft cloth slightly dampened with water or mild soap.
- Avoid: Do not use excess water or cleaning solvents.
Battery Maintenance:
- Battery Type: Use only supplied NiMH (Nickel Metal Hydride) batteries. Other types or non-rechargeable batteries can be dangerous and cause interference/damage.
- Charging: Do not use third-party charging bays.
- Polarity: Observe correct polarity when inserting batteries.
- Heat/Water: Do not expose batteries to excessive heat (sunshine, fire) or immerse in water.
- Disposal: Dispose of used batteries according to instructions. Risk of explosion if replaced by an incorrect type.
Warranty and Support:
- Warranty: Statutory 2-year warranty provided by the retailer.
- Extended Warranty: Available for up to 5 years if registered at www.euphones.vtech.com within 30 days of purchase.
- Exclusions: Extended warranty does not cover batteries, cables, damage from pets, drops, water, or sun exposure.
- Customer Service: Contact the Customer Service Centre for setup or operation difficulties.
To Next Page
General
