VTech CS6319 User Manual

17
Telephone operation
Voice language (Canada only)
You can select English or Français for the voice prompts used in the
answering system.
To change the setting:
Press MENU/SELECT to display the menu when the handset is not in use.
Press MENU/SELECT to select >Answering Sys.
Press or to select >Ans sys setup, then press MENU/SELECT.
Press or to select > Voice language , then press MENU/SELECT.
Press or to choose from English or Français, then press
MENU/SELECT VQEQPſTO[QWTUGNGEVKQP
1.
2.
3.
4.
5.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account information or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MENU/
SELECT twice to select
>
Directory.
Scroll to the desired entry by pressing
or .
Press
MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press or to highlight
>
Call log.
Press
MENU/SELECT to select.
Scroll to the desired entry by pressing
or .
Press
MENU/SELECT to dial the displayed number.
To access the last number on the redial list while on a call:
Press REDIAL/
PAUSE to dial. Press REDIAL/PAUSE again within two seconds
to cancel the chain dialing.
1.
2.
3.
1.
2.
3.
4.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 20.
You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 27.
If you press REDIAL/
PAUSE while on a call, you can only view the most
recent call, and you cannot erase the entry. For more details about the
redial memory, see page 30.
Press and hold OFF/
CLEAR to exit redial, directory or call log when you are
on a call.
•
•
•
•

VTech CS6319 Specifications

General

Brand	VTech
Model	CS6319
Category	Telephone
Language	English