VTech CS6619-2 User Manual

3
Getting started
Place the battery with the label
THIS SIDE UP facing up and
the wires inside the battery
compartment.
2.Plug the battery connector securely
into the socket, matching the
orientation of the engraved label.
1.
Slide the battery compartment cover
towards the center of the handset
until it clicks into place.
3. Place the handset in the telephone
base or charger to charge.
4.
Battery installation
Install the battery as shown below.
If the handset will not be used for a long period of time, disconnect and remove the
battery to prevent any possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
•
•
CHARGE light
remains on
when charging.

VTech CS6619-2 Specifications

General

Color	silver
Speakerphone	yes
Volume Control	yes
Intercom	no
Incoming Lines	1
Caller ID	yes
Flash Function	yes
Handsets	yes
Backlit Keypad	yes

Weight and Dimensions

Height	7 inches
Net Weight	1 ounces