Speed dial
You can copy up to 9 directory entries into the speed dial locations (0 and 2-9) so that
you can dial these numbers using fewer keys than usual.
The speed dial memory locations are stored in the telephone base and are shared by
all handsets. Changes made to the speed dial entries on one handset apply to all.
Assign a speed dial entry
Press MENU when the phone is not in use.
Press or to scroll to Directory, then press SELECT.
Press or to scroll to Speed dial, then press SELECT.
Press or or the dialing keys (0 or 2-9) to choose the
desired speed dial location.
Press SELECT. The screen displays Copy from DIR...
and then the first entry in the directory.
Press or to browse to the desired entry.
-OR-
Use the alphabetical search to find the desired entry
(see page 32).
Press SELECT to save. You hear a confirmation. The name
(up to 12 characters) appears in the selected speed
dial location.
If the directory is empty, when you press SELECT in Step 5,
the screen displays Directory empty.
If the speed dial location you selected is occupied, the new
directory entry you selected replaces the old one. Take caution
not to replace entries you do not wish to delete from the speed
dial locations.
1.
2.
3.
4.
5.
6.
7.
•
•
0:<Unassigned>
ECO
Copy from DIR...
ECO
Mike Smith
800-595-9511
ECO
0:Mike Smith
ECO
To Next Page
Loading...
Need help?
General
