22
Ringer volume
You can set the ringer volume or turn
the ringer off on each handset. When
the ringer is off, appears on the
screen.
Press MENU when the handset is not
in use.
Press or to choose Ringers, and
then press SELECT.
Press or to select Ringer
volume, and then press SELECT.
Press or to sample each volume
level.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
If the ringer volume is set to off, that
handset is silenced for all incoming calls
except paging tone.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset and telephone base without
disconnecting the call. The next call
rings normally at the preset volume.
Press OFF or MUTE on the handset
and it displays Ringer muted and .
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
1.
2.
3.
4.
5.
•
•
•
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted.
To set the duration and turn on the
quiet mode:
Press and hold
when the
handset is not in use.
The handset displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
Press SELECT to save. You hear
a confirmation tone. The handset
displays Quiet mode on and .
To turn off the quiet mode:
Press and hold when the
handset is not in use. The handset
displays Quiet mode off briefly and
then returns to idle.
When you change the settings of the
ringer tone or ringer volume, you can still
hear the samples even if the quiet mode
is on.
1.
2.
3.
•
•
To Next Page
Loading...
Need help?
General
