Telephone operation
Memory match
When the incoming telephone number matches the last seven digits of a
telephone number in your directory, the screen displays the stored name of
the directory entry.
For example, if Linda Jones calls, her name appears as Linda if this is how
you entered it into your directory.
Review the call log
Press CID when the handset is not in use.
Press CID or to browse.
-OR-
Press MENU/SELECT when the handset is not in use. Press CID or
to select Call log.
Press MENU/SELECT twice and then press CID or to browse.
View dialing options
Although the call log entries received have 10 digits (the area code plus
the seven-digit number), in some areas, you may dial only the seven
digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven
digits. You can change the number of digits that you dial from or store to
the directory.
While reviewing the call log, press # (pound key)
repeatedly to show different dialing options for
local and long distance numbers before dialing
or saving the telephone number in
the directory.
Press 1 repeatedly if you need to add or
remove 1 in front of the telephone number
before dialing or saving it in the directory.
When the number is shown in the correct
format for dialing, press /FLASH on the
handset to call the number.
1.
2.
1.
2.
The number shown in the call log is in the format sent by the telephone
service provider. It usually delivers 10-digit telephone numbers (area code
plus phone number). If the last seven digits of the incoming telephone
number does not match a number in your directory, the name appears as it
is delivered by the telephone service provider.
If you have programmed the home area code (see page 10), only the last
seven digits of the incoming phone numbers from that area code will be
displayed while reviewing the call log. Press # repeatedly to display all
possible dialing options.
Press # 1-800-595-9511
Press # 595-9511
Press # 1-595-9511
Press # 800-595-9511
-OR-
Press 1 1-800-595-9511
Press 1 800-595-9511
Mike Smith
800-595-9511
10:15 PM
12/25
You hear a double beep when you reach the beginning or end of the call log.
To Next Page
Loading...
Need help?
General
