27
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
Press MENU/SELECT and then press / VOL or VOL/CID to highlight
>
Directory.
Press MENU/SELECT and then press / VOL or VOL/CID to scroll to the
desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press / VOL or VOL/CID to highlight
>
Call log.
Press MENU/SELECT and then press / VOL or VOL/CID to scroll to the
desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number on the redial list while on a call:
Press REDIAL/PAUSE.
Press / VOL, VOL/CID or REDIAL/PAUSE repeatedly to browse to the
desired entry.
Press MENU/SELECT to dial the displayed number.
1.
2.
3.
1.
2.
3.
1.
2.
3.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 37.
You cannot copy a call log entry into the directory while on a call. For more
details about the call log, see page 43.
You cannot erase a redial entry while on a call. For more details about the
redial memory, see page 28.
Press OFF/CLEAR to exit the directory, call log or redial when you are on
a call.
•
•
•
•
To Next Page
Loading...
