VTech DECT 6.0 IS6100 User Manual

50
Answering system settings
Announcement
The telephone is preset with a greeting that answers calls with “Hello, please
leave a message after the tone.” You can use this preset announcement, or
replace it with your own.
Record your own announcement
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Answering sys, then press
MENU/SELECT.
Press MENU/SELECT to highlight
>
Announcement.
The handset announces, “To play, press 2. To record, press 7.”
Press 7 to record.
The handset announces, “Record after the tone. Press 5 when you
are done.”
After the tone, speak towards the microphone of the handset.
Press 5 when nished.
The answering system automatically plays back the newly recorded
announcement. Press 5 to stop the playback at any time; 2 to replay the
recorded announcement; or 7 to record again if desired.
Play your announcement
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Answering sys, then press
MENU/SELECT.
Press MENU/SELECT to highlight
>
Announcement.
The handset announces, “To play, press 2. To record, press 7.”
Press 2 to play.
Delete your announcement
Press MENU/SELECT when the handset is not in use.
Press / VOL or VOL/CID to highlight
>
Answering sys, then press
MENU/SELECT.
Press MENU/SELECT to highlight
>
Announcement.
The handset announces, “To play, press 2. To record, press 7.”
Press 3 to delete your own recorded announcement. The handset
announces, “Announcement deleted.”
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
1.
2.
3.
4.
Your announcement can be up to 90 seconds in length.
Announcements shorter than two seconds will not be recorded.
•
•
When your announcement is deleted, calls are answered with the
preset announcement.

VTech DECT 6.0 IS6100 Specifications

General

Brand	VTech
Model	DECT 6.0 IS6100
Category	Cordless Telephone
Language	English