18
Caller ID
This product supports caller ID services oered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or base speaks
“Call from...” and the name of the caller based on the directory or caller ID information.
You can turn this feature o for the base or each individual handset, or both.
Using a cordless handset or the telephone base:
1. MENU -> / -> Caller ID annc -> SELECT.
2. / to choose On or O -> SELECT.
Review and dial a number in the call log
1. Press CID on the handset or telephone base in idle mode -> / to scroll
through the list.
2. Press
HOME/FLASH or /SPEAKER on the handset or /HOME on the
telephone base to dial with the home line.
-OR-
Press CELL on the handset, or press /CELL on the telephone base to dial
with the cell line.
Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and
hold OFF/CANCEL on the handset or CANCEL on the telephone base in idle mode.
To activate remote voice control:
1. Press VOICE.
-OR-
If you have two connected cell phones -> / to select a device.
2. When the telephone base or handset plays the conrmation tone, speak toward
the telephone base or handset, and then wait for feedback. Make reply to the
voice app’s feedback, if necessary.
3. Press CANCEL to exit.
Refer to the online Complete user’s manual for a list of troubleshooting tips on
using Remote voice control feature.
Bluetooth
To Next Page
Loading...
Need help?
General
