13
13
13
WORKBENCH ASSEMBLY INSTRUCTIONS
Please refer to images on pages 3, 4 and 5.
1. Use the included L-Wrench to
screw a Gray Toy Nut to a Gray
Toy Screw. Repeat for all 19 Gray
Toy Nuts and Gray Toy Screws.
2. Use the included Drill or Screwdriver to tighten 8 Gray
Toy Screws and Nuts to attach the Right and Left Leg
Supports where the center tray will rest on the left and
right legs.
3. Insert the Center Tray into the
two Leg Supports. You will hear
the pieces snap together when
correctly inserted.
To Next Page
Loading...
