VTech Drill & Learn Workbench

18
18
18
Activating Normal Play Mode
The first time the Drill & Learn Workbench™ is used, you will
need to exit Try-Me mode and activate Normal Play mode.
1. Turn the unit On.
2. Place a Power Tool on the Power Tool Zone. You will hear
a sound indicating that the unit is in Normal Play mode.
Using the Power Tools
Drill Press
• Place the Drill Press in the Power
Tool Zone.
• Place a rectangular Building Piece
on the base of the Drill Press.
• Press down the Drill Press handle
to pretend to make straight holes.