VTech DS6301 User Manual

4
Getting started
Add and register a handset
You can add new handsets (DS6301, purchased separately) to your
telephone system, but each handset must be registered with the telephone
base before use. When rst purchased, each expansion handset shows
Press and hold FIND HANDSET on base for 4 sec, then press # on
handset after a battery is installed. You may need to charge the handset
before registering to the telephone base. For more details on battery
charging, see the table on page 3.
To register a handset:
Press and hold /FIND HANDSET on the telephone base for about four
seconds until the red IN USE light turns on.
Press # on the handset. Its screen shows Registering...Please wait and
it takes up to 60 seconds to complete the registration. The handset shows
HANDSET X Registered (X represents the handset number assigned)
and you hear a beep when the registration is completed.
1.
2.
If the registration fails, the handset shows Registration failed for a few
seconds and then Press and hold FIND HANDSET on base for 4 sec,
then press # on handset. Try the registration process again.
You cannot register a handset if any other system handset is in use.
•
•

VTech DS6301 Specifications

General

Type	DECT telephone
Answering machine	No
Speakerphone	Yes
Dialer location	Handset
Phonebook capacity	50 entries
Redial list capacity	1
Mounting type	Desk
Product color	Black, Silver
Backlight color	Blue
Volume control	Digital