Telephone operation
27
Make a cell call
Press /CELL on the handset. The handset displays Select a device.
If you have only one cell phone connected to the telephone base,
press SELECT and then the handset displays D1 selected.
If you have two cell phones connected to the telephone base, press or
to select a cell phone and then press SELECT. Then the handset displays
D1/D2 selected.
Enter the telephone number, then press /CELL to dial.
The handset displays Unable to call if your cell phone is in use.
The handset shows the elapsed time as you talk (in hours, minutes and seconds).
While entering numbers, press DELETE or CANCEL to make corrections;
press and hold PAUSE to insert a dialing pause (a p appears).
While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles such as large furniture or thick
walls between the telephone base and the cell phone.
Predial a cell call
Enter the telephone number.
Press /CELL to dial.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
If you have two cell phones connected to the telephone base, the handset
displays Select a device. Press or to select a cell phone and then
press SELECT.
The handset displays Unable to call if your cell phone is in use.
The handset shows the elapsed time as you talk (in hours, minutes and seconds).
While entering numbers, press DELETE or CANCEL to make corrections;
press and hold PAUSE to insert a dialing pause (a p appears).
Answer a cell call
Press /CELL, or any dialing key (0-9, or ) to answer.
You can also use your cell phone to answer the call. If you answer with your cell
phone, it will disconnect from the telephone base.
1.
•
•
2.
•
•
•
•
1.
2.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
