15
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become familiar
with using your Bluetooth enabled cell phone and your new DS6621 telephone system.
Bluetooth cell phone - refers to a Bluetooth enabled cellular telephone.
Cell line - the telephone line associated with your cell phone service. On your
DS6621 handset, press /CELL to use the cell line.
Connected - when you pair a Bluetooth cell phone to the DS6621, it is
automatically connected. When a cell phone is connected, 1 and/or 2 displays
after on the handset and the CELL 1 and/or CELL 2/HEADSET light on the
telephone base is on. If a cell phone loses its connection to the telephone base, it
must be reconnected before you can use the cell phone with the DS6621.
Disconnected - when a cell phone is disconnected, the on the handset no
longer displays and the CELL 1 and/or CELL 2/HEADSET light on the
telephone base is off.
Discoverable mode - before a Bluetooth enabled device can be paired, it must be
set to this mode. When pairing your cell phone, the telephone base will be set to
this mode. Depending on the manufacturer, this mode is sometimes referred to as
Find Me or Visibility.
Home line - your conventional telephone land line. On your DS6621 handset,
press /HOME/FLASH to use the home line.
Paired device - once a Bluetooth enabled cell phone has been paired with the
telephone base, it appears on the cell devices list. A maximum of two cell phones
can be paired with the telephone base.
Pairing - this refers to the process of Bluetooth enabled cell phone registering
device information with each other. The telephone base must be paired with
the Bluetooth enabled cell phone before it can be used. Depending on the
manufacturer, this is also referred to as Bonding.
PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth
devices. PIN information must be exchanged between Bluetooth devices before
they can be used. This is also known as a Passkey or Passcode.
To Next Page
Loading...
Need help?
General
