18
Bluetooth
Add a Bluetooth enabled headset
To pair and connect a headset:
Press MENU on the phone when it is not in use.
Press or to highlight Bluetooth, and then press SELECT.
Press or to highlight Add BT headset, and then press SELECT. The
screen displays Search headset...
If there is already a cell device in the slot, the existing cell phone will be
erased from cell devices list..
4. Set your headset to discoverable mode (refer to the user’s manual of your
headset on the Bluetooth feature of your headset). Once your handset finds your
headset, press SELECT.
• Enter the PIN of your headset if required. The PIN for most Bluetooth devices
is 0000 (refer to the user’s manual of your headset), then press SELECT.
5. When the headset is successfully paired and connected to the telephone base,
the
2
icon displays. The CELL 2/HEADSET device light turns on.
The pairing process may take up to one minute. If the pairing process fails, turn off
the Bluetooth feature on your headset and on the DS6621 by pressing CELL
2/HEADSET . Then repeat the steps above to pair and connect again. In some
cases, it may take you a few attempts to complete the pairing process.
When a connected headset is charging, it may disconnect from the telephone
base and the CELL 2/HEADSET light on the telephone base turns off. For some
headset models, you may need to turn on the headset and reconnect it to the
telephone base again.
If you have trouble pairing your headset, it may not be compatible with your
DS6621. Check the Bluetooth compatibility list at www.vtechphones.com.
Auto connection
A cell device may be disconnected from the telephone base when:
The Bluetooth feature of your connected cell device is turned off.
The power of your cell device is turned off.
Your cell phone is not within range of the telephone base.
When the Bluetooth feature or power on the cell device is turned on, or it moves
within range of the base, the base will try to reconnect to the cell device. If you
disconnect the cell device from the cell devices list, the base will not attempt to
reconnect unless your cell device is moved out of range and back in range again.
1.
2.
3.
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
