EasyManuals Logo

VTech ErisStation VCS712 User Manual

VTech ErisStation VCS712
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Install the base station
1. Plug one end of the telephone line cord into the TEL LINE jack on the rear of
the base station, and plug the other end into a telephone wall jack.
2. Connect the modular jack power adapter to the base station power jack.
3. Plug the power adapter into an electrical outlet that is not controlled by a wall
switch.
IMPORTANT INFORMATION
Use only the modular jack power adapter provided with the product.
To order a replacement power adapter, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
The modular jack power adapter is intended to be correctly oriented in a
vertical or oor mount position. The prongs are not designed to hold the plug
in place if it is plugged into a ceiling, under-the-table, or cabinet outlet.
Install the conference phone battery
CAUTION: Risk of explosion! Batteries should not be exposed to
excessive heat such as bright sunlight or re.
CAUTION: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
Use only the supplied battery.
1. After removing the battery door, plug the battery connector securely into the
socket inside the battery compartment.
2. Place the battery into the battery compartment with the label THIS SIDE UP
facing up.
3. Attach the battery door, and secure it in place with the provided screws.
Connect power to the conference phone
1. Plug the round jack end of the AC adapter into the power jack on the back of
the charging dock.
2. Plug the large end of the AC adapter into a wall outlet not controlled by a
switch.
3. Place the rear connectors of the conference phone into the charging dock.
The supplied round jack power adapter is designed for use only with the
VCS712 conference phone. It is not designed to power other devices. Do
not connect the supplied round jack power adapter to any other devices.
The round jack power adapter is intended to be correctly oriented in a
vertical or oor mount position. The prongs are not designed to hold the
plug in place if it is plugged into a ceiling, under-the-table, or cabinet
outlet.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VTech ErisStation VCS712 and is the answer not in the manual?

VTech ErisStation VCS712 Specifications

General IconGeneral
BrandVTech
ModelErisStation VCS712
CategoryConference Phone
LanguageEnglish

Related product manuals