VTech ErisTerminal ET635 - Settings on the phone

77
ET635 User Manual 
◦ LP Feature (funconality for long-pressing key)
This is a shortcut to the conguraon menu of each freely programmable SmartLabel key with LED
(keys P1–32). In the default seng, the funcon is enabled (Fig. 1).
If necessary, use the toggle to select the page the key is on, and then press the key for three
seconds to open its conguraon menu. The yellow LED on the key blinks. See "Sengs on the phone"
on page 77, steps 4–7, on how to connue.
Note: The LP feature must be deacvated for the funcons Push2Talk and Line Info Layer.
If the LP feature of a key has been disabled, use the Preferences menu to access the key's
conguraon menu. See "Sengs on the phone" on page 77.
Fig. 1 Fig. 2
Programming the funcon keys
The freely programmable funcon keys on the phone and on all connected expansion modules can be mapped
on the phone and on the phone's web interface. We recommend using the web interface which is faster and
more comfortable.
Sengs on the phone
On the phone, a limited number of funconalies is available.
1. Press > Preferences > Fkeys (Fig. 1).
Fig. 1 Fig. 2 Fig. 3 Fig. 4
2. Press to select SmartLabel Keys (Fig. 2).
3. Press to select Line keys page 1, 2, 3, or 4, respecvely, and press (Fig. 3).
4. Press to select a key and press (Fig. 4). The default seng is "Line".