To Next PageTo Next Page
Need help?Do you have a question about the VTech IS8152-5 and is the answer not in the manual?
General| Number of Lines | 1 |
|---|---|
| Display | LCD |
| Speakerphone | Yes |
| Answering System | Yes |
| Maximum Handsets Supported | 5 |
| Expandable | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Voicemail | Yes |
| Intercom | Yes |
| Conference | Yes |
| Headset Jack | Yes |
| Power | AC Adapter |
| Range | Up to 1, 000 feet |
| Battery Life | Up to 10 hours talk time |
| Battery | Rechargeable NiMH |
| Frequency | 1.9 GHz |
| Type | Cordless Phone |
Using voice prompts for initial setup of call blocking and answering systems.
Detailed steps for pairing and connecting a Bluetooth-enabled cell phone to the base.
Detailed steps for pairing and connecting a Bluetooth headset to the base.
Steps to enable and use the voice control feature on the handset or base.
Procedures for handling home calls using the handset, base, or Bluetooth headset.
How to handle incoming calls when already on a home line call.
Procedures for handling cell calls using the handset or base.
How to handle incoming calls when already on a cell line call.
Steps to answer a cell call while on a home call and resume the home call.
Steps to answer a home call while on a cell call and resume the cell call.
How to set up a 3-way conference call with home and cell lines.
How to answer home or cell calls during an active intercom session.
Transferring outside calls or sharing calls with other system devices via intercom.
Making a one-to-one push-to-talk call to another handset or the base.
Making one-to-group push-to-talk calls to multiple devices simultaneously.
Steps to add new contacts, including numbers and names, to the phonebook.
How Smart Call Blocker manages incoming calls based on categories and profiles.
Enabling or disabling the Smart Call Blocker feature.
Configuring call screening profiles for handling unknown and unwelcome calls.
Adding numbers manually or from redial/caller ID lists to the block list.
Adding numbers manually or from redial/caller ID lists to the allow list.
Adding names to the star list, typically for robocalls.
Types of incoming calls that will ring through when Smart Call Blocker is active.
Changing the security code for remote access to the answering system.
