21
Alternate way to set up
1. Press CALL BLOCK on the telephone
base to enter the call block menu
when in idle mode.
- OR -
Press MENU/SELECT to enter the
main menu when the telephone
is not in use. Then, press q CID or
p to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p to scroll to Voice
guide, then press MENU/SELECT.
3. You hear a voice prompt “Hello! This
voice guide will assist you with the
basic setup of Smart call blocker...”
4. Set up your Smart call blocker
feature by inputting the designated
numbers, as instructed in the voice
guide.
• Press 1 if you want to screen home
calls with telephone numbers that
are not saved in your phonebook,
allow list or star name list; or
• Press 2 if you do not want to
screen calls, and want to allow all
incoming calls to get through.
NOTES
• The screening feature of Smart call
blocker is applicable to home calls
only. All incoming cell calls will get
through and ring. If you want to
block a cell call, add the number to
the block list. See Block list section.
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time. After the date and time setting
is done or skipped, the telephone
base will prompt if you want to
set up Smart call blocker via voice
guide. Press MENU/SELECT to start
the setup.
To Next Page
Loading...
Need help?
General
